What is a Packaged Water Chiller?

A packaged water chiller is essentially a refrigeration unit, a ‘plug and play’ type, which incorporates all components, including the compressor, condenser, water pump, water storage tank, and control system into a single unit or cabinet.

The various components are no longer something you have to coordinate. The complete system will work as is, right out of the factory, providing a constant supply of temperature-controlled cooling water for your process or equipment.

How does a Packaged Water Chiller Work?

Its principle is based on a vapor compression refrigeration cycle. That sounds very professional, but in fact, it can be simply understood as four constantly recurring steps.

Step 1: Evaporation – absorption of heat

The refrigerant enters the evaporator as a low-temperature, low-pressure liquid. While passing through the evaporator coil, it absorbs heat from process water. In other words, cooling starts from here.

Step 2: Compression – Raise temperature and pressure

Then, the gaseous refrigerant is drawn into the compressor. The compressor compresses it with the help of a motor into a high-temperature and high-pressure gas. This is the key to the whole refrigeration cycle.

Step 3: Condensation – Release the heat

Then, the high-temperature and high-pressure refrigerant enters the condenser. Depending on the type of chiller, it can dissipate heat through cooling water (water-cooled type). After the heat has been released to the outside, the refrigerant will condense into a medium-temperature and high-pressure liquid.

Step 4: Throttling – Re-prepare the refrigeration

Finally, the liquid refrigerant passes through the expansion valve or capillary tube, and its pressure suddenly decreases and it becomes low-temperature and low-pressure liquid. It can then enter the evaporator to start a new round of heat absorption cycle.

Advantages of Packaged Water Chillers

Plug and Play

All internal pipe connections, refrigerant charging and functional tests of this equipment have been done before leaving our factory. When arriving at your site, it can be brought into operation almost immediately once we connect power supply and water circuit to it.

Highly Integrated

The compressor, condenser, evaporator, water pump, and water tank are all compactly installed in the same steel casing along with an electric control cabinet. A design such as this saves space but also reduces the possibility of installation errors.

Long-term Stable Operation

The average uptime of ChillerOne’s packaged water chillers in industrial environments can be up to 99.4%, which means you seldom have to worry about unexpected downtime.

Control preciso de la temperatura

The refrigeration system can achieve a temperature control accuracy of ±1° F. No matter how strict the temperature requirements of your process are, it can maintain firmly within the set range.

Corrosion-resistant and Durable

The body is made of galvanized and painted metal casing, which is strong, corrosion-resistant, and looks very professional. The evaporator section takes a fully insulated and corrosion-resistant stainless steel brazing plate structure, which can withstand complex working conditions for a long time.

Adapt to Various Temperature Changes

Whether you need near-freezing-point cooling water, face high reflux temperatures, or operate in high or low-temperature environments, it can maintain stable output and ensure the continuous high efficiency of the system.

Key Components of Packaged Water Chiller

High-Performance Compressor

This whole machine adopts digital scroll or compresores de tornillo, with the advantages of stable output and high energy efficiency. According to different cooling capacity demands, the configurations are appropriately selected. 

Each compressor supports variable capacity control to achieve soft start and stepped power regulation ranging from 25% to 100%, thus ensuring smoother start-up and lower energy consumption.

Sistema de control inteligente

An open-source microprocessor control system, specially developed for the refrigeration and HVAC industries, is fitted on the equipment; this enables it to communicate well with either BMS or BAS. Whether it is on-site operation or remote monitoring, you can track the running status in real time.

High-efficiency Evaporator

The evaporator is of a fully insulated, stainless steel brazed plate structure that is resistant to corrosion. It boasts high heat exchange efficiency, low scaling tendency, and long-time stability.

Compressor Protection System

The chiller is fitted with a crankcase heater and an intake accumulator to prevent liquid hammer from causing damage to the compressor when the temperature is low or during shutdown. The phase monitor and electrical protection device can also perform automatic intervention in abnormal power supply conditions, further enhancing reliability.

Safety Anti-Freezing Design

Additionally, with an internal water flow switch and a hot gas bypass valve, it can act quickly in the case of pump failure or abnormal flow rate to prevent process fluid from freezing, ensuring system safety.

Condenser System

Optional high-efficiency shell-and-tube water-cooled condensers or rust-resistant, high-volume copper tube, and aluminum fin air-cooled condensers are available.

If your system needs to operate in high-salt or coastal environments, we can also provide dedicated Marine condensers made of anti-corrosion materials, which remain stable and reliable even after long-term operation.

Thermal Insulation and Structural Design

All the process pipes have been treated with insulation for maximum thermal efficiency. Meanwhile, Vibration isolators are mounted on the bottom of the compressor to effectively prevent operating noise and vibration from transferring.

Customization Options for Packaged Water Chillers

Each project has different working conditions, so ChillerOne offers various optional configurations to let you freely customize system performance according to on-site requirements.

Válvula de expansión electrónica (EEV)

You can also opt for an electronic expansion valve if you are pursuing higher energy efficiency and more stable temperature control performance. It accurately adjusts the flow rate of the refrigerant during every cycle of refrigeration to make the process more even and controllable.

Electrical System Upgrade

We can add in compressor fuses, circuit breakers, and circuit protection devices for you to ensure the equipment still operates safely in the event of electrical load fluctuations or short circuits.

Multiple Pump Configurations

According to the required flow and pressure, each pump can be made of stainless steel with different specifications, designed by standards with a sturdy structure, corrosion resistance, and adaptability to various water quality environments.

Upgrade of Fluid Pipeline

Optional flow meters, pressure gauges, and low-flow bypass valves provide for accurate monitoring of the operating status of the system, hence making it easier for you to control fluid circulation.

Condenser Water Pressure Regulating Valve

In the water-cooling systems, if there is a regulating valve optionally equipped for condenser water pressure control, it maintains the optimal operating pressure and heat exchange efficiency under different ambient temperatures or flow rates.

Classification of Packaged Water Chillers

When you go to select a packaged water chiller, you may find many kinds in the market. In fact, chillers can mainly be classified from two perspectives: the type of compressor and the circuit structure. Different configurations mean different installation methods, energy efficiency performances, and maintenance requirements.

By Compressor Type

A compressor can be thought of as the “heart” of a chiller, and different types will affect the overall performance and energy consumption.

• Piston compressors: The main drawback is that they are relatively noisy, vibrate a lot, and their overall energy efficiency is merely average. They are mainly used in small units or older ones.
• Compresor scroll: This is currently the most common configuration. If you are concerned about stability and energy-saving effect, the compresor scroll will be usually a good choice. It runs smoothly in operation with low noise, and can flexibly adjust the load in the range of 10% – 100%. It is applicable to small and medium-sized air-cooled and water-cooled units.
• Compresores de tornillo: They are more fitted for large-scale refrigeration tasks. It has a compact structure with high energy efficiency and long service life, thus highly suitable for industrial applications that require continuous operation.

By Circuit Structure 

Single-loop Chiller

This model structure is relatively simple because it contains only one set of compressors, evaporators, condensers, and expansion valves. If your cooling requirements are relatively fixed, a single-loop machine is sufficient. But when operating at partial load, its efficiency will decline and frequent starts and stops may increase energy consumption or wear.

Dual-loop Chiller

If you want the equipment to keep running without shutting down, a dual-loop design will bring more advantages. It integrates two independent refrigeration systems in the same chassis, sharing the water tank, water pump, and electrical control system. Even if one of the circuits malfunctions, the other can still keep operating, and the cooling capacity is never interrupted. This is very popular in industries with very high requirements for continual production.

Key Parameters of Packaged Water Chiller

The most important thing you should pay attention to in choosing a packaged water chiller is its core performance parameters. There are figures such as the cooling capacity, temperature control accuracy, flow rate, head, and power. Although these figures may be simple, they directly determine the stability and energy efficiency performance of the equipment. The following table can help you quickly understand the main technical indicators and provide a reference for subsequent selection.

How to Install a Packaged Water Chiller?

The installation of a packaged water chiller is not complex, but details determine performance. As long as you follow the steps below, it’s possible to get the device into a stable working state more quickly.

Step 1: Check the Installation Environment

First, confirm whether the on-site conditions are suitable before the formal installation.

Ensure that the space is large enough. The amount of maintenance space to leave around the unit is at least 0.8 to 1 meter to facilitate later inspection and cleaning.

The environment should be kept well-ventilated, dry, and dust-free; the ambient temperature should be between 5°C and 40°C.

Check the ground for evenness and solidity; it should support the weight of the whole machine during operation.

Step 2: Connect the Pipelines

In accordance with the markings on the body of the machine, correctly connect the water inlet and outlet, and install isolation valves at each interface. All water piping must be properly insulated in order to minimize cold loss and prevent condensation.

Step 3: Electrical Wiring

Electrical connections should be done by a qualified electrician. Prior to use, please confirm that the voltage, frequency, and other parameters indicated on the nameplate conform to the power supply at the site, and the safety protection equipment is properly worn.

Step 4: Liquid Injection and Exhaust

Open the water tank or the water filling port, and add the circulating medium of the specified type. Then start the water pump and open the exhaust valve to completely expel the air in the system. When a steady flow of water is seen flowing out of the exhaust valve, close the valve.

Step 5: Startup and Debugging

Power can be applied to start after confirming that the electrical, pipeline, valve, and other connections are correct.

First, during the operation, you can pay attention to whether there is any abnormal noise or vibration of the equipment, and observe at the same time if the outlet water temperature and exhaust pipe temperature are within the normal range. If everything is normal, it indicates that the chiller has been in good working condition.

How to choose a Packaged Water Chiller?

Before buying a packaged water chiller, don’t hurry to look at the parameter table. First of all, you need to figure out what problem you want to solve. Different processes have different requirements for temperature, flow rate, and even the structure of the machine type. To lock in an appropriate model, you first need to go through the following steps.

Identify Your Cooling Needs

First, determine what kind of equipment you want to cool and the range in temperature it needs along with the water flow rate. As an example, plastic mold temperature control is usually in the 5°C to 25°C range; laser equipment and chemical reaction vessels need more precise or even lower temperature control. According to these data, you can refer to the key parameter table of the chiller to quickly filter out the model that meets the cooling capacity and accuracy requirements.

Choosing the Right Setup

Next, it depends on the configuration. According to the application environment of your site, determine whether to use an air-cooled or water-cooled structure. If there is a shortage of water in your area or the installation space is limited, air-cooled types are usually more convenient. However, if you are pursuing the goal of energy efficiency and long-term stable operation, then water-cooling type will suit you better.

Moreover, you can also customize the compressor brand, pump body material or control system according to your needs. ChillerOne offers a variety of configuration options. Whether you are concerned about corrosion resistance, temperature control accuracy or overall energy efficiency, you can find a match.

Professional Packaged Water Chiller Manufacturer in China

ChillerOne is a Professional Packaged Water Chiller Manufacturer in China. We pay close attention to ensuring that our operations supply the global customer base with efficient, reliable packaged water chiller solutions. Whether plastic molding, laser welding, or any other industrial application calls for close temperature control, we’re flexible regarding your equipment needs. 

If you’re seeking a packaged water chiller truly tailored to your specific operating conditions, feel free to contact ChillerOne at any time. Our technical team offers 24/7 services from model selection and design to delivery and installation. We ensure every unit operates reliably on-site.